Fittings, valves and tubing in SS316, carbon steel, brass and specialist alloys — sized 1/8" to 1" and rated to 10,000 psi, with material traceability on every line item.
Nine core categories held against project specifications, with dimensional and pressure data confirmed at enquiry stage.
Twin-ferrule instrumentation tube fittings for leak-tight, remakeable connections on impulse lines, analyser tubing and hydraulic runs.
| Type | Size | Material | Pressure |
|---|---|---|---|
| Union | 1/8"–1" (6–25 mm) | SS316 / CS / Brass / Alloy | Up to 6000 psi |
| Elbow | 1/8"–1" (6–25 mm) | SS316 / CS / Brass / Alloy | Up to 6000 psi |
| Tee | 1/8"–1" (6–25 mm) | SS316 / CS / Brass / Alloy | Up to 6000 psi |
| Adapter | 1/8"–1" (6–25 mm) | SS316 / CS / Brass / Alloy | Up to 6000 psi |
Threaded pipe fittings to NPT and BSP standards for utility, instrument air and general process connections.
| Type | Size | Material | Standard |
|---|---|---|---|
| Coupling | 1/8"–2" | SS316 / CS | NPT / BSP |
| Plug | 1/8"–2" | SS316 / CS | NPT / BSP |
| Reducer | 1/8"–2" | SS316 / CS | NPT / BSP |
Fine-throttling needle valves for isolation and calibrated flow control on gauge, transmitter and sampling lines.
| Pattern | Size | Material | Pressure |
|---|---|---|---|
| Straight | 1/8"–1" (6–25 mm) | SS316 / Alloy | 6000–10,000 psi |
| Angle pattern | 1/8"–1" (6–25 mm) | SS316 / Stainless steel | High-pressure flow control |
Quarter-turn instrumentation ball valves for positive isolation, available in 2-way and 3-way diverting configurations.
| Configuration | Size | Material | Pressure |
|---|---|---|---|
| 2-way | 1/8"–1" (6–25 mm) | SS316 / CS | Up to 6000 psi |
| 3-way | 1/8"–1" (6–25 mm) | SS316 / CS | Up to 6000 psi |
Direct-mount and remote-mount manifolds for differential pressure transmitters — block, bleed and equalise in a single assembly.
| Type | Connection | Material | Service |
|---|---|---|---|
| 2-valve manifold | 1/2" NPT | SS316 | Instrumentation service |
| 3-valve manifold | 1/2" NPT | SS316 | Up to 6000 psi |
| 5-valve manifold | 1/2" NPT | SS316 | Instrumentation service |
Inline non-return valves protecting instruments and sample systems from reverse flow, with defined cracking pressures.
| Type | Size | Material | Pressure |
|---|---|---|---|
| Spring type | 1/8"–1" (6–25 mm) | SS316 | Up to 6000 psi |
| Ball type | 1/8"–1" (6–25 mm) | SS316 | Up to 6000 psi |
Fully annealed seamless instrument tubing, supplied in continuous coils to minimise fittings and potential leak paths across a run.
| Product | Size | Material | Standard |
|---|---|---|---|
| Seamless instrument tubing | 1/8"–1" (6–25 mm) | SS316L / Duplex / Copper / Alloy | ASTM A269 / A213 |
Wall thickness selected against working pressure, bend radius and ferrule grip — specified at enquiry so the tube and fitting are matched.
| Option | Wall thickness | Material | Service |
|---|---|---|---|
| Standard options | 0.028"–0.065" (0.7–1.6 mm) | SS / CS / Alloy | High-pressure service |
Supplied in project-matched lengths on spools or wrapped coils, packed for export so tubing reaches site undamaged and traceable.
| Supply | Wall thickness | Length | Packing |
|---|---|---|---|
| Standard supply | 0.028"–0.065" | 10–200 m | Export packing, spool / wrapped |
The analyser is only as reliable as the sample reaching it. We supply the complete measurement chain.
Panel-mounted conditioning systems built to the sample stream — filtration, pressure reduction, temperature control and flow verification, assembled and tested before dispatch.
Continuous measurement for process control and environmental compliance, selected against your stream composition and detection range.
Purification and desalination packages for industrial duty — skid-mounted or containerised for rapid deployment.
Membrane systems engineered around your feedwater analysis, with pre-treatment, dosing and CIP scope handled in the same package.
Beyond the core catalogue, we source instrumentation, mechanical and fire & gas equipment against project specifications.
Share your specification and we'll return a compliant, costed proposal with lead times and certification scope.
